Home / Additional equipment / SPECIAL PROBE TYPE-AL FOR HARDNESS TESTER TKM-459CE

Special probe Type-AL for hardness tester TKM-459CE

Article: no
SPECIAL PROBE TYPE-AL FOR HARDNESS TESTER TKM-459CE
Rating:
(0 votes)
share

Price on request

Special probe Type "AL" - is an exclusive invention of Mashproject LLC and HAS NO comparable rivals!

Special probe Type AL- hardness tester TKM459CE

 

Special probe with 50 N load.

The 65 mm long tip allows to measure hardness in hard-to-reach areas: 
- in small diameter holes up to 62 mm deep,
- between the teeth of the gears,
- in grooves, recesses, etc.

 

The design of hardness testers TKM-459CE provides full interchangeability of probes!

Probe type AL is purposed for hardness measurement of following:

  • Carbonaceous and structural steels;
  • Items with surface-hardened layers such as cementation, nitride hardening, high frequency current hardening;
  • Heat-proof, corrosion-proof, non-corrosive steels;
  • Plated coating (chrome), overlaying;
  • Items of complicated configuration.

Advantages

  • Stable readings independent from force and time of pressing.
  • Easy measuring in hard-to-reach areas.
  • Ultra-small control area (from 1 mm).
  • Control in slots and blind holes from 5 mm (not provided by rival devices).
  • Invisible print on mirror-surface.
  • Low sensitivity to the curvative of surface, thickness and weight of product.

Probes characteristics

Photo Probe Type Load Length, mm Diameter, mm Application
Probe Type A_H_C for Hardness tester TKM‑459CE
«А» 50 N (5 kg) 145 26 Solving the bulk of control problems
«Н» 10 N (1 kg) 145 26 Galvanic coating hardness control (chrome etc.)
«С» 100 N (10 kg) 145 26 Unprepared surface control
Probe Type K for Hardness tester TKM‑459C «К» 50 N (5 kg) 76 36
Hardness control in tubes and hard-to-reach areas
Probe Type Al for Hardness tester TKM‑459CE «AL» 50 N (5 kg) 190 26
Hardness control in hard-to-reach areas (length of tip 65 mm)

ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.

We also recommend to buy Hardness tester TKM‑359CE.

Special probe Type-AL is designed to solve the bulk of the problems of hardness control of metals and alloys.

Requirements to controlled item:

  • Items heavier than 1 kg and thicker than 2 mm need no additional preparation;
  • Items lighter than 1 kg should be fixed in a vice clamp or on a support plate by fixing paste;
  • Items thinner than 2 mm should be fixed in a vice clamp or on a support plate by fi xing paste;
  • Roughness of controlled surface providing best measurement accuracy is 1.6 RA.

ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.

Photo Probe Type Load Length, mm Diameter, mm Application
Special probe Type-AL for hardness tester TKM-459CE «АL» 50 N (5 kg) 190 26 Hardness control in hard-to-reach areas (length of tip 65 mm)

ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.

Standard probe Type-AL 1 piece

ATTENTION! There is a built-in Lemo plug-in in the probe. Connection cable is sold separately.


Description of the UCI Hardness tester TKM‑459CE
UCI Hardness tester TKM‑459CE Download - Description Hardness tester TKM‑459CE

Product is in categories:

Back