Home / Additional equipment

Additional equipment

Filter

Present options and accessories to meet your most unusual tasks of nondestructive control.

Sort by:
STANDARD PROBE "N-345" FOR FLAW DETECTOR VID-345
STANDARD PROBE "N-345" FOR FLAW DETECTOR VID-345
Article: no
Searching for stress-corrosion fractures even under layer of corrosion and/or protective coating

Price on request

STANDARD PROBE TYPE-A FOR HARDNESS TESTER TKM-459CE
STANDARD PROBE TYPE-A FOR HARDNESS TESTER TKM-459CE
Article: no
Standard probe with 50 H load. Ultra-small control area (from 1 mm). Solving the bulk of control problems

Price on request

SPECIAL PROBE TYPE-H FOR HARDNESS TESTER TKM-459CE
SPECIAL PROBE TYPE-H FOR HARDNESS TESTER TKM-459CE
Article: no
Special probe with 10 H load. Thin-walled and small-sized products. Galvanic coating hardness control

Price on request

SPECIAL PROBE TYPE-C FOR HARDNESS TESTER TKM-459CE
SPECIAL PROBE TYPE-C FOR HARDNESS TESTER TKM-459CE
Article: no
Special probe with 100 H load. Unprepared surface control. Thick-walled, large-sized objects

Price on request

SPECIAL PROBE TYPE-K FOR HARDNESS TESTER TKM-459CE
SPECIAL PROBE TYPE-K FOR HARDNESS TESTER TKM-459CE
Article: no
Special short probe (length-76 mm). Hardness control in tubes and hard-to-reach spots. Load - 50 H (5 kg)

Price on request

SPECIAL PROBE TYPE-AL FOR HARDNESS TESTER TKM-459CE
SPECIAL PROBE TYPE-AL FOR HARDNESS TESTER TKM-459CE
Article: no
Special probe with a long indenter (65 mm). Probe with 50 H load. HAS NO comparable rivals

Price on request

SPECIAL HEAD "U-459" FOR HARDNESS TESTER TKM‑459CE
SPECIAL HEAD "U-459" FOR HARDNESS TESTER TKM‑459CE
Article: no
Special head for probe positioning on complex surfaces (min diameter 4 mm)

Price on request

PROBE CABLE FOR HARDNESS TESTER TKM‑459CE
PROBE CABLE FOR HARDNESS TESTER TKM‑459CE
Article: no
Connection cable for UCI Hardness tester TKM‑459CE. The average service life - 100 000 measurements

Price on request

STANDARD PROBE TYPE-D FOR HARDNESS TESTER TKM‑359CE
STANDARD PROBE TYPE-D FOR HARDNESS TESTER TKM‑359CE
Article: MP_359_DD
The standard probe for control of hardness of metals and alloys, included in the Basic delivery set

Price on request

SPECIAL PROBE TYPE-E FOR HARDNESS TESTER TKM‑359CE
SPECIAL PROBE TYPE-E FOR HARDNESS TESTER TKM‑359CE
Article: MP_359_DD
Probe for control of materials with high hardness. Indenter made of polycrystalline of boron nitride

Price on request

SPECIAL PROBE TYPE-D WITH SOCKET FOR HARDNESS TESTER TKM‑359CE
SPECIAL PROBE TYPE-D WITH SOCKET FOR HARDNESS TESTER TKM‑359CE
Article: MP_359_DD
Probe with socket to solve the main problems of hardness control of metals and alloys

Price on request

SPECIAL PROBE TYPE-E WITH SOCKET FOR HARDNESS TESTER TKM‑359CE
SPECIAL PROBE TYPE-E WITH SOCKET FOR HARDNESS TESTER TKM‑359CE
Article: MP_359_DD
Special probe with socket with decreased impact energy for control of materials with high hardness

Price on request

SPECIAL PROBE TYPE-G FOR HARDNESS TESTER TKM‑359CE
SPECIAL PROBE TYPE-G FOR HARDNESS TESTER TKM‑359CE
Article: MP_359_DD
Special probe with increased impact energy for control of items with high structural heterogeneity and roughness Ra from 7.2

Price on request

SPECIAL HEAD "Z-359" FOR HARDNESS TESTER TKM‑359CE
SPECIAL HEAD "Z-359" FOR HARDNESS TESTER TKM‑359CE
Article: MP_359_DD
Special head "Z-359" for easier probe positioning on complex surfaces. The surface diameter of 18 mm

Price on request

PROBE CABLE FOR HARDNESS TESTER TKM‑359CE
PROBE CABLE FOR HARDNESS TESTER TKM‑359CE
Article: no
Connecting cable for Special probe Type "D"/"E" with socket. The average service life - 60 000 measurements

Price on request

Mashproject LLC will offer you to buy additional equipment at the best price.